Bridging question
3 posts by 3 authors in: Forums > CWDP & CWAP - Enterprise Wi-Fi Design & Analysis
Last Post: January 11, 2005:
Last Post: January 11, 2005:
-
lets say you have two sets of bridge links with different ssid, different non overlapping channel, but the same wep.
These are cisco 350 b radios, and the root bridges are about 20 feet apart. there should not be any interference right. I am just trying to rule out different possible problems. -
Sounds right to me
shouldn't cause any problems because on different frequencies...
make sure ch1, ch6 or ch11 being used if in US
If in another country then check your local rules & regs or go to cisco.com and do a search for link calculator
:-) -
For Cisco bridges, minimum recommended separation distance is 10 feet so you should have no problem.
Joel
Page 1 of 1
- 1